Browse Tag: ceramic kiln

PIDKiln v0.6 development – update

So far so good – most of the stuff is done. Currently I’m tuning PID usage, and what’s left is traversing program in time – but that’s easy.

To tune PID parameters and test it, you can use simple halogen light bulb (or car light bulb) connected with thermocouple. This is a good heat source to around 100C and it’s easy to see when it’s working 馃檪

  • Quick Program
    Kp=10, Ki=5, Kd=1
  • Kp=10, Ki=0.1, Kd=0

You just have to switch SSR to DC-DC one (for kiln you probably will use DC-AC). For easy testing I’ve prepared “Quick program” in LCD menu – where you can set one program step. Provide desire temperature, time and dwell – and you can run it.

PIDKiln – my new controller for ceramic kiln

After some experience with controlling my ceramic kiln with Linux over cron scripts, I’ve moved to Chinese PC410 controller. But (probably) because it was knock off, it had removed plenty of useful features (you can read about it, in Polish here) I’ve decided to do my own controller.

PIDKiln v0.2 - screens
PIDKiln v0.2 - main screen

I’ve looked around Internet for existing solutions, and found one – interesting enough, but still lacking very important future for me – Internet connectivity. I need to be able to monitor my kiln overt network, see what’s going on and be able to turn it off.

So this is how it came to life my controller – based on ESP32 chip, feature rich PID controller for kiln, with network connectivity, local LCD display and all possible safety features I needed.

You can download project sources from github and build your own. All required information you will find there. Here I’ll show how to build it in step-by-step process.

What’s done already (updated 19.09.2019):

PIDKiln assembled – all components
  • All common procedures and functions for LCD, input (encoder) and Webserver
  • Program handling like upload, delete, show
  • Program loading to memory and full sanitization
  • Preference handling, information screen, and graphs for WWW a tiny for LCD 馃檪
  • MAX31855 + thermocouple readout and handling

What needs to be done:

  • PID control – now work in progress
  • testing… testing… and 馃檪